US 3-Prong AC Plug Pigtail – 1 Meter, 14 AWG

Description

This one-meter grounded North American AC pigtail is intended for qualified installation on compatible screw-terminal power supplies. It has a molded three-prong plug and three prepared conductors for line, neutral, and protective earth.

AC Pigtail Specifications

Compatible Power Supplies and Miner Systems

This is an AC-input cable for a power supply, not a cable that plugs directly into a miner. The downstream DC supply and wiring determine which miner family the system can power.

Mains-Wiring Safety

AC mains voltage can cause fatal shock, fire, or equipment damage. Installation should be performed by a qualified person and comply with local electrical code. Open-frame supplies require a suitable nonconductive or grounded enclosure, guarded terminals, strain relief, ventilation, protective-earth bonding, an upstream disconnect, and correctly rated overcurrent protection.

1. Disconnect the cable from the receptacle and prove the circuit is de-energized.
2. Confirm the supply is configured for the local AC voltage before energizing it.
3. Terminate black to L, white to N, and green to FG/protective earth according to the power-supply manual.
4. Use properly crimped ring or fork terminals sized for 14 AWG and the terminal block; do not rely on bare tinned ends where the terminal manufacturer requires ferrules or lugs.
5. Cover all mains terminals, provide strain relief, and keep AC wiring separated from low-voltage DC wiring.
6. Inspect protective-earth continuity and all terminations before connecting any miner.